The Build
Every Session x Teak piece starts as a design our own crew rides before it goes into production. We laser cut the parts from high grade Baltic birch plywood, glue and assemble them by hand, then hand sand every edge until the lips and landings feel finished. Every obstacle is handcrafted start to finish in our Rochester, NY shop. Session Fingerboards is part of the Teak Tuning family, and the Session x Teak collaboration line is where our fingerboarding obstacles come from.
Materials and Wear
Birch structure with acrylic across every surface you'd actually ride. The acrylic scuffs as you use it, which is wear, not damage. Store it flat so the benches stay square to the table.
Care
Keep it dry and indoors. Plywood swells if it sits in moisture, so keep it off damp surfaces and wipe it with a dry cloth. Use a dry cloth on the acrylic and skip solvents and polish, they haze the finish
A mini fingerboard obstacle in Baltic birch, 15cms L and a little taller at 2.5cms tall, with a matte acrylic coping edge that slides fast out of the box.
This is the travel size of our full size pad, and the smallest thing we make that still has real coping on it. It drops in a jacket pocket or a backpack sleeve, sits on a desk without taking it over, and gives you a genuine acrylic edge for slides and tech lines.
- Size: 15cms L x 7cms W x 2.5cms H
- Coping: matte acrylic in ivory and teal brick
- Stacks: sits flush on the full size Manual Pad for a double layer
- Build: laser cut, glued, and hand sanded in Rochester, NY
Includes: 1 Pocket Manual Pad Short stack fully assembled. Fingerboard not included. The full size pad shown in scale photos is sold separately.