The Build
Every Session x Teak piece starts as a design our own crew rides before it goes into production. We laser cut the parts from high grade Baltic birch plywood, glue and assemble them by hand, then hand sand every edge until the lips and landings feel finished. Every obstacle is handcrafted start to finish in our Rochester, NY shop. Session Fingerboards is part of the Teak Tuning family, and the Session x Teak collaboration line is where our fingerboarding obstacles come from.
Materials and Wear
Birch structure with acrylic across every surface you'd actually ride. The acrylic scuffs as you use it, which is wear, not damage. Store it flat so the benches stay square to the table.
Care
Keep it dry and indoors. Plywood swells if it sits in moisture, so keep it off damp surfaces and wipe it with a dry cloth. Use a dry cloth on the acrylic and skip solvents and polish, they haze the fini
A pair of Baltic birch fingerboard kickers with a brick textured riding face, each 16.5cms long and 5.5cms tall.
The brick is the point. The texture runs across the transition face of both kickers, so the wheels pick up a tactile rumble on the way up and you hear the roll change the second you leave the flat. The pattern is cut into the ply, not printed on it, so it deepens as it wears instead of peeling. It reads like a plaza bank rather than a bare sheet of wood.
- Size: 16.5cms L x 15cms W x 5.5cms H per kicker
- Material: high grade Baltic birch plywood
- Surface: brick texture engraved into both riding faces
- Modular: both tab into the Junction midsection
- Build: laser cut, textured, and hand sanded in Rochester, NY
Includes: 2 wooden kickers, brick engraved face on both. Fingerboard not included.
Details